Medium Flush Wood NexGen-Fyre™ Arch
What's The Magic
The Medium Flush Wood NexGen-Fyre™ Insert converts a wasteful masonry or zero clearance fireplace into an excellent heat source that can provide reliable warmth at a fraction of the cost of electricity or oil. With a three-sided convection chamber and standard 180 CFM convection fan, this insert is designed to deliver the maximum heat output from the wood you burn due to our advanced NexGen-Fyre™ technology.
Specs
Heating Capacity*
1,200 to 2,000 Square Feet
Emissions
2.4 Grams Per Hour (CORD WOOD)
EPA Tested BTUs**
15,583 to 55,395 BTU’s Per Hour
Real World BTUs**
See Below
Maximum Burn Time
Up to 10 Hours
LHV Overall Efficiency***
Up to 78%
HHV Overall Efficiency***
Up to 72%
Glass Viewing Area
@
Firebox Size
2.2 Cubic Feet
Maximum Log Size
24”
Weight
450 Pounds
Construction
5/16” to 1/4” Steel Plate
* Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone
of the area you live.
** EPA tests to determine BTU output are achieved with a single load of wood at each burn rate. At home, you are likely
to add more wood to your insert to maintain your desired comfort level. By the simple process of loading your fireplace
insert with additional wood, you could achieve up to a 20% higher heat output than established during EPA testing.
*** Overall efficiency as tested using B-415.1 using Cord Wood. LHV = Low Heat Value, HHV = High Heat Value.
